HM Digital PSC-154 TDS/EC Controller with 4-20mA Output, 0-9999 µS Measurement Range, 0.1 µS/ppm Resolution, +/-2% Readout Accuracy

Hm Digital Psc-154 Tds/Ec Controller 4-20ma Output Ppm Conductivity Monitor is a 4-20mA TDS/EC controller designed to maintain optimal TDS/EC levels in commercial high-performance systems. It features an extended measuring range, digital calibration, an on-screen temperature display, a tri-color display, and a 4-20mA output.

Built-in sensor for automatic temperature compensation (ATC) guarantees accurate measurements at different temperatures. A bright 5/8″ L.E.D. display makes it easy to see the reading measurements.

FEATURES:

– Large and bright LED display.

– 4-20mA output signal can be connected to PLC to record values.

– An alarm will sound if the TDS/EC level exceeds the user set level.

– A given point controls the device switch.

– The screen display shows the temperature (C/F).

– The kit includes one sensor probe (part #SP-1-PSC).

PRODUCT DESCRIPTION:

– EC range: 0-9999 µS

– TDS range: 0 – 5000 ppm

– Temperature range: 1-75°C; 33-167°F

– Accuracy: ±2% (of reading)

– Conversion factor: NaCl (average value 0.5)

– Resolution: 0.1 µS/ppm (0-999); 1 µS/ppm (1000-9999)

– ATC: Yes (1 – 65°C)

– Calibration: Digital via push button

– Setting the control point: One point controlled by the up/down buttons on the screen (any point in the range)

– Relay control: The unit will open or close the contact when the preset ppm/µS level is reached or exceeded (simple switching). It can be used to control a pump, solenoid valve, or other device.

– Relay voltage: 5V

– Output signal: 4-20mA

– Output Accuracy (mA): ±1%

– Alarm: Constant beep (user configurable)

– Display: Bright 5/8″ LED display.

– Probe: 1/2″ threaded hole (NPT), 3 meters (9.8 feet) shielded cable

– Power supply: AC 110V / AC 220V

– Dimensions: 7.2 x 7.2 x 11.1 cm (2.8 x 2.8 x 4.4 inches)

– Monitor weight: 241 g (8.5 oz)

– Total weight (delivered): 610 g (1 lb 5.5 oz)

Hm Digital Psc-154 Tds/Ec Controller is a reliable controller that will help you monitor and maintain optimal TDS/EC levels in your commercial system. Thanks to its features, you can quickly check measurements and adjust the control level using a switch and set point.